background

Nickel Alloy 200 Bolt/Nut in South Korea

We are best Manufacturers, Exporters & Stockists of Nickel Alloy 200 Bolt/Nut in South Korea. Nascent Pipe & Tubes is one of the prominent whole seller and supplier of quality Nickel Alloy 200 Fasteners (Bolts / Nuts), which is the higher carbon (0.04 – 0.10) version of the alloy. These Nickel 200 Hex Head Bolts has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments.

Nickel 200 Hex Head Nuts is also advantageous for high temperature service because of its good mechanical properties. These Nickel 200 Square Bolts offers higher creep and stress rupture properties than Alloy 304 and, particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns. Nickel 200 Square Nuts is a columbium (niobium) / tantalum stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular-corrosion resistance.

Nickel Alloy 200 Bolt/Nut Manufacturers, Nickel Alloy 200 Bolt/Nut Suppliers, Nickel Alloy 200 Bolt/Nut Stockists, Nickel Alloy 200 Bolt/Nut Exporters

Nickel Alloy 200 Bolt/Nut Manufacturers in South Korea, Nickel Alloy 200 Bolt/Nut Suppliers in South Korea, Nickel Alloy 200 Bolt/Nut Stockists in South Korea, Nickel Alloy 200 Bolt/Nut Exporters in South Korea

These Nickel 200 Eye Bolts has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum. Nickel 200 Eye Nuts was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).

In most instances, the carbon content of these Nickel 200 T-Bolts enables dual certification. Nickel 200 T-Nuts does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. These Nickel 200 U-Bolts can be easily welded and processed by standard shop fabrication practices.

Nickel Alloy 200 Bolt/Nut Specifications

Specifications ASTM B 160 ASME SB 160
Standard DIN, ASTM, BS and all International Standards
Length 3 mm to 200 mm
Size M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

200 Nickel Alloy Bolt/Nut Chemical Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max - 0.01 max 0.25 max

Nickel Alloy 200 Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 200 Nickel Bolt/Nut

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

Our Export

Domestic Area

Mumbai Ahmedabad Bhopal Bikaner Pune
Delhi Chennai Visakhapatnam Mangalore Nagpur
Bangalore Kolkata Siliguri Assam Indore
Hyderabad Surat Nashik Cochin Thane
Faridabad Rajkot Aurangabad Bhavnagar Ranchi
Coimbatore Mysore Salem Tirupur Bikaner
Raipur Bhubaneswar Bhilai Ankleshwar Bhiwandi
Vadodra Kochi

People Also Search

Nickel Alloy 200 Bolt/Nut Manufacturers, Nickel Alloy 200 Bolt/Nut Suppliers, Nickel Alloy 200 Bolt/Nut Stockists, Nickel Alloy 200 Bolt/Nut Exporters, Nickel Alloy 200 Bolt/Nut Manufacturers in South Korea, Nickel Alloy 200 Bolt/Nut Suppliers in South Korea, Nickel Alloy 200 Bolt/Nut Stockists in South Korea, Nickel Alloy 200 Bolt/Nut Exporters in South Korea